Kubota B7200 Specs
Production | |
Manufacturer | Kubota |
Compact Utility tractor | |
Built in Japan | |
Original price was $10,500 in 1990 with B7200HST-D |
Kubota B7200 Serial Numbers | |
Location: | Right side of transmission case |
1983 | 50532 |
1984 | 51758 |
1985 | 60683 |
1986 | 62548 |
1987 | 64737 |
1988 | 65307 |
1984 | 50026 (HST) |
1985 | 50711 (HST) |
1986 | 52531 (HST) |
1987 | 55065 (HST) |
1988 | 55977 (HST) |
Variants | |
B7200E | 2WD gear |
B7200D | 4WD gear |
B7200HST-E | 2WD hydro |
B7200HST-D | 4WD hydro |
Kubota B7200 Engine Detail | |
Kubota D950 | |
diesel | |
3-cylinder | |
liquid-cooled | |
Displacement | 56.6 ci 0.9 L |
Bore/Stroke | 2.95×2.76 inches 75 x 70 mm |
Power (gross) | 17 hp 12.7 kW |
Air cleaner | dry paper element |
Rated RPM | 2500 |
Starter volts | 12 |
Oil capacity | 3.6 qts 3.4 L |
Coolant capacity | 3 qts 2.8 L |
Transmission | |
Type | gear |
Gears | 6 forward and 2 reverse |
Clutch | 7.2-inch dry disc |
Oil capacity | 12.7 qts 12.0 L |
Three gears (1-3) plus reverse with high and low ranges. |
Kubota B7200 Power | |
Engine (gross) | 17 hp 12.7 kW |
PTO (claimed) | 14 hp 10.4 kW |
Plows | 1 (12-inch) |
Mechanical | |
Drive | 4×2 2WD |
4×4 MFWD 4WD (B7200D) | |
Manual steering | |
Dry internal expanding brakes | |
Two-post ROPS. |
Capacity | |
Gear Fuel | 3.8 gal 14.4 L |
Hydro Fuel | 5.3 gal 20.1 L |
Gear Hydraulic system | 3.2 gal 12.1 L |
Hydro Hydraulic system | 3.6 gal 13.6 L |
Tractor hitch | |
Rear Type | I |
Rear lift (at ends) | 1,036 lbs 469 kg |
Rear lift (at 24″/610mm) | 705 lbs 319 kg |
Electrical | |
Charging system | alternator |
Charging amps | 35 Opt |
Battery volts | 12 |
Power Take-off (PTO) | |
Rear RPM | 540/825 |
Hydro Mid RPM | 1546/2455 |
Front PTO | optional |
Front RPM | 2500 |
Hydraulics | |
Type | open center |
Gear Capacity | 3.2 gal 12.1 L |
Hydro Capacity | 3.6 gal 13.6 L |
Valves | 1 |
Total flow | 4 gpm 15.1 lpm |
Kubota B7200 Tires | |
2WD Standard tires (ag) | Front: 5.00-10. Rear: 8-16 |
4WD Standard tires (ag) | Front: 6-12. Rear: 8-16 |
Optional tires (ag) | Front: 5.00-10. Rear: 9.5-16 |
2WD Lawn/turf front | 18×9.50-8 |
4WD Lawn/turf front | 20×8.00-10 |
Lawn/turf rear | 29×12.00-15 |
31×13.5-15 |
Dimensions | |
Gear Wheelbase | 55.1 inches 139 cm |
Hydro Wheelbase | 57.9 inches 147 cm |
Gear Length | 100 inches 254 cm |
Hydro Length | 102 inches 259 cm |
Width | 44.9 inches 114 cm |
2WD Height (exhaust) | 71.5 inches 181 cm |
4WD Height (exhaust) | 72 inches 182 cm |
2WD Front tread | 28 inches 71 cm |
4WD Front tread | 33.9 inches 86 cm |
Rear tread | 29.1 to 35.8 inches 73 to 90 cm |
Kubota B7200 Weight | |
Shipping | 1113 lbs (B7200E) 504 kg |
1256 lbs (B7200D) 569 kg | |
1213 lbs (B7200HST-E) 550 kg | |
1356 lbs (B7200HST-D) 615 kg |
Kubota B7200 Attachments
Attachment overview | |
48″ mid-mount mower deck | |
60″ mid-mount mower deck | |
Snowblower | |
Kubota B1630C loader | |
Kubota B1640 loader | |
Kubota B1640A loader | |
Kubota LA300 loader | |
Backhoe | |
Mowers for the Kubota B7200 included the mid-mount RC48-62/RC60-72 (front PTO mount for gear-driven tractors), the RC48-62H/RC60-72H (mid PTO mount for hydrostatic tractors), and the B3538 48-inch rear-mounted finish mower. Three tillers were available: Kubota models FL850 (33.5 inch), B422 (42-inch), and the FL1000 (39.1 inch). Additional tillage tools included the B340 48-inch tandem disc harrow and B380 single-bottom (14-inch) moldboard plow. The B2551 snowblower could be front or rear mounted. |
Kubota L4520 Backhoe | |
Backhoe type | Kubota L4520 Backhoe |
Transport height | 61.2 inches 155 cm |
Bucket width | 10 inches 25 cm |
12 inches 30 cm | |
16 inches 40 cm | |
2-Foot flat digging depth | 79.5 inches 201 cm |
Reach from pivot | 97.8 inches 248 cm |
Loading height | 84 inches 213 cm |
Bucket Rotation | 170° |
Swing Arc | 177° |
Bucket force | 1450 lbs 657 kg |
Dipperstick force | 2885 lbs 1308 kg |
Kubota B7200 Problems
The Kubota B7200, a compact tractor, is reported to be experiencing a number of issues, primarily related to its hydraulic system, beginning issues, and attachment functionality. Here are a few of the major problems reported by customers:
Hydraulic System Problems
Hydraulic Pump Problems: Users have complained of problems getting hydraulic fluid into the filter that sits on top of the pump that drives hydro. This could happen after maintenance or after the system has been depleted and then left idle. Cleaning screens or trying to prime lines might not be enough to resolve the issue and require an examination of the pump’s hydraulic components. It is a challenge when local services don’t offer testing of the pump.
3-Point Hitch Malfunctions: Issues with the 3-point hitch’s malfunction have also been reported. This could be due to issues such as overfilling the hydraulic fluid, which may cause spillage during operation, or internal problems with the piston or cylinder, which prevent proper lifting. The users have recommended looking for bypassing pressures or checking that the hitch is regularly maintained to avoid problems.
Starting Difficulties
Fuel Pump Failure: Certain owners have had difficulties starting their tractors due to a malfunctioning fuel pump. Following the replacement of the fuel pump and priming of the fuel lines, the tractor might start to run, but it is imperative to make sure all connections are secure and that the fuel system has been primed.
General Maintenance Problems
U-Joint Wear: Some reports indicate that the U-joints on the driveshaft could wear out over time, which could cause mechanical failure when not properly addressed. Regular inspections and maintenance are essential to avoid such issues.
Leaking Fluids: Certain users have noticed small leaks of oil under the carriage. This could necessitate gasket replacements or seal checks in order to reduce the loss of fluid.
These issues emphasize the importance of routine maintenance and quick troubleshooting in order to keep the Kubota b7200 in good condition.
Kubota B7200 Reviews
Kubota B7200 is popular with users due to its reliability and small dimensions, which makes it ideal for a variety of residential uses. Here are some insights based on the experiences of users and reviews:
General Impressions
Durability and Reliability: Many owners laud their B7200 for its strong construction and long-lasting. The B7200 is said to be used for years if it is maintained regularly, noting that it appears to last forever.
Compact Size: The small size of the B7200 makes it possible to move easily, even in small spaces. This can be beneficial for landscaping residential properties as well as small farm tasks.
Performance
Power: The B7200 is fitted with a Yanmar diesel engine that provides sufficient power for the majority of household tasks. However, some customers express the need for more power, especially when using attachments such as backhoes.
Speed and Transmission: The tractor comes with a manual transmission, with two reverse and six forward gears. Although some people prefer hydrostatic transmissions due to their ease of use, others prefer the manual setup to be adequate for their needs.
Maintenance and Parts Availability
Maintenance: Owners have shared that although the B7200 is simple to repair, finding parts can be difficult and can be costly. This is especially evident for those who have completed repair or restoration projects for older models.
Common Issues: Certain users have encountered problems with hydraulics, such as issues with the hitch’s three points not retaining their place. DIY fixes can fix the majority of these issues.
User Ratings
The B7200 has been awarded an average of 4.8 out of 5 stars from its users, the majority of them giving it five stars. Its most popular pros are its size, simplicity of use, and dependability, as well as cons that often point to the need for greater power and the difficulties in getting parts.
Conclusion
Overall, Kubota’s B7200 is considered to be a good choice for anyone looking for an efficient, compact tractor that can be used for simple agricultural landscaping or other work. Although it has some limitations in terms of the power supply and availability of parts, its dependability and user-friendliness make it a preferred choice among many of its users.