Kubota M5400 Specs
| Engine Detail | |
| Kubota F2803 | |
| diesel | |
| 5-cylinder | |
| liquid-cooled | |
| Displacement: | 167.6 ci 2.7 L |
| Bore/Stroke: | 3.43×3.64 inches 87 x 92 mm |
| Power (gross): | 58 hp 43.3 kW |
| Rated RPM: | 2700 |
| Torque: | 129 lb-ft 174.9 Nm |
| Torque RPM: | 1600 |
| Starter volts: | 12 |
| Coolant capacity: | 8.5 qts 8.0 L |
| Kubota M5400 Power | |
| Engine (gross): | 58 hp 43.3 kW |
| Engine (net): | 54 hp 40.3 kW |
| PTO (claimed): | 50 hp 37.3 kW |
| Transmissions overview | |
| 8-speed partially synchronized | |
| 12-speed creeper |
| Transmission | |
| Type: | partially synchronized |
| Gears: | 8 forward and 4 reverse |
| Clutch: | dry disc |
| Oil capacity: | 42.3 qts 40.0 L |
| Oil type: | Kubota Super UDT |
| Four gears (1-4) in two ranges (low/high) plus reverse range. Synchronized shifting between gears 3 and 4. | |
| Transmission | |
| Type: | creeper |
| Gears: | 12 forward and 4 reverse |
| Mechanical | |
| Chassis: | 4×2 2WD |
| 4×4 MFWD 4WD | |
| Steering: | power |
| Brakes: | mechanical wet disc |
| Cab: | Two-post ROPS |
| Transmissions: | 8-speed partially synchronized |
| 12-speed creeper | |
| Hydraulics | |
| Type: | open center |
| Valves: | 1 |
| Pump flow: | 11 gpm 41.6 lpm |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 540 (1.375) |
| Engine RPM: | 540@2295 |
| Electrical | |
| Ground: | negative |
| Battery CCA: | 615 |
| Battery volts: | 12 |
| Tractor hitch | |
| Rear Type: | II/I |
| Control: | position and draft control |
| Rear lift (at ends): | 4200 lbs 1905 kg |
| Rear lift (at 24″/610mm): | 3307 lbs 1500 kg |
| Kubota M5400 Tires | |
| 2WD Standard tires (ag): | Front: 7.5-16. Rear: 16.9-28 |
| 4WD Standard tires (ag): | Front: 9.5-22. Rear: 16.9-28 |
| Dimensions | |
| Wheelbase: | 78.7 inches 199 cm |
| Length: | 137.6 inches 349 cm |
| DT-N Length: | 134.3 inches 341 cm |
| Width: | 72.8 inches 184 cm |
| DT-N Width: | 48 inches 121 cm |
| Height (ROPS): | 94 inches 238 cm |
| 2WD Weight: | 3858 lbs 1749 kg |
| 4WD Weight: | 4078 lbs 1849 kg |
| Ground clearance: | 18.1 inches 45 cm |
| DT-N Ground clearance: | 14 inches 35 cm |
Kubota M5400 Attachments
| Kubota LA1001 Loader | |
| Height (to pin): | 114 inches 289 cm |
| Clearance, dumped bucket: | 89 inches 226 cm |
| Dump reach: | 35 inches 88 cm |
| Dump angle: | 39° |
| Reach at ground: | 71.3 inches 181 cm |
| Rollback angle: | 25° |
| Breakout force (at pin): | 3330 lbs 1510 kg |
| Lift to full height (at pin): | 2205 lbs 1000 kg |
| Bucket width: | 72 inches 182 cm |
Kubota M5400 Poblems
It is possible that the Kubota M5400 tractor can experience many common issues, as stated by owners as well as service reports. Here are some potential issues:
- Hydraulic System Problems Users have reported issues regarding the hydraulic system, such as low response times and leaks. Regular maintenance of the hydraulic liquid and filter is vital to stop these issues from happening.
- Electrical Issues Owners have experienced electrical problems, including damaged wiring or malfunctioning generators, which could cause beginning problems or battery drain.
- Transmission Issues There are occasional reports of transmission issues, particularly in the shifting gears. This could be due to inadequate transmission fluid or worn parts.
- Engine performance users have noticed issues with engine performance, including stalling or rough idle. These issues can usually be linked to problems with the fuel system, such as blocked filters or injector issues.
- Overview of Maintenance Regular maintenance is crucial. Not changing the oil in your engine or filters, as well as coolant, can cause excessive heat or wear on the engine, affecting overall performance and longevity.
- Tire Wear Certain users have reported uneven wear of their tires, which could affect their traction and handling. Regular checks and alignment can reduce the risk of this happening.
- Cooling System Problems with the cooling system, such as leaks or blockages in the radiator, could cause excessive heat. Regular inspections, along with maintenance for the cooling system, are vital.
Taking care to address these issues quickly through regular inspections and maintenance can ensure that the Kubota M5400 runs smoothly and effectively.
Kubota M5400 Review
The Kubota M5400 is a utility tractor renowned for its efficiency and versatility and is suitable for many agriculture tasks. Here’s a complete review based on review and specs.
Engine and Performance
This model is driven by a five-cylinder Kubota diesel engine, which produces the power of 58 horsepower. The engine is known for its fuel efficiency and allows users to operate for two days with just a fuel tank. This is a significant advantage for long hours of work in the field.
Design and Build
With a weight of around 4,000 pounds, the M5400 is available in one or four-wheel drive models. The weight is designed to provide ility as wand traction, making it suitable for smaller and bigger farming tasks. The design of the tractor permits ease of movement, making it ideal for many different applications, including mowing and loader work.
User Experience
Users have reported that they have repa performance. M5400 runs well and is robust enough for a variety of tasks. It’s praised for its balance of power and size, being not overly large for small tasks but capable of efficiently handling larger tasks.
Market and Value
The price for used models of the M5400 can differ substantially based on the conditions and attachments. For example, an M5400 model from 1996 with a front-end loader and a brush hog cost around $10,000, indicating the importance of well-maintained units. However, some users have noticed that pricing is subjective and may need adjustments based on demand in the local area.
In conclusion, Kubota’s M5400 is a sturdy and robust tractor that can meet the requirements of different agriculture operations with fuel efficiency, power, and versatility.